PCB Fabrication quote PCB Assembly quote Free passive parts

Via Tent-Holes with Solder Mask

Capping Vias’ Holes with Screened Resist

Via capping is a process by which holes can be capped. Vias may be screened using solder mask with the creation of an epoxy cap for PCBs that have a liquid photo-imageable mask. As a task that is accomplished during the initial tooling, changes to artwork that are critical to processing should be made. The client must provide the vias that must be capped by detailing them in a unique design file. In addition, master pad solder mask and via files, such as solder mask and via pads which are identical to the outer layer pads, must also be provided by the client.

Design Limitations of Via Hole Capping

The largest via hole caps should have a diameter of 0.50 mm (0.020 inches). The best drill diameter should be 0.53 mm (0.021 inches).

Typically, the board’s up side is where non test vias are capped. This is particularly true beneath BGA parts. Avoid capping vias on the top and bottom sides of the board because it can cause either broken or raised caps.

A raised surface of about 0.06 mm ±0.05 mm (0.0025 in. +/- 0.002 in) above the outer layer of the copper pad will occur with via caps. This specification can include the solder and / or permanent solder-mask thickness.

For random locations of open holes, a board fabrication facility guarantees a 98 percent plugged-hole minimum.
Bittele Offered Technical Expertise to Attendees at IPC APEX EXPO 2016
Bittele Electronics Exhibited at EPTECH 2016
Bittele Electronics Completes New PCB Assembly Line
Bittele strategy climbs turnkey PCB assembly ladder
Bittele Electronics Announces ISO 9001:2008 Certification
Bittele Electronics Sponsors Georgia Tech's Solar Car Engineering Team
Bittele Electronics Offers Free 'Design For Manufacturing' Service to its Customers
Bittele Electronics Introduces New Website for German Customers
Bittele Electronics Sees Double-Digit Growth
Bittele Electronics Adds Quick-Turn Capabilities
Sample Bill of Materials (BOM)
Sample Assembly drawings
How to create a Centroid File?
How to Export Gerber Files from Eagle?
Bittele's ISO 9001:2008 Certificate
PCB Fabrication Specifications
payment types
About Us | Services | Quality | Archives | Privacy | Contact
Copyright 2003-2017, Bittele Electronics Inc. All Rights Reserved.