PCB Fabrication quote PCB Assembly quote Free passive parts
 

Stencil thickness calculations

The industry standard IPC7525 provides two major parameters for determining the stencil thickness and aperture size:

stencil thickness

• Aspect Ratio
The width of aperture / thickness = W/T
The lowest acceptable aspect ratio is 1.5.

• Area Ratio
Surface area of aperture / surface area of the aperture walls = L x W/ (2 x (L+W) x T)
The lowest acceptable area ratio is 0.66.

However, there are are special considerations for real PCB assembly. Here are the stencil thickness design principles:
1) The stencil thickness should satisfy the most fine-pitch QFPs and BGAs, while taking into account the smallest chip size.
2) When the QFP pitch ≤ 0.5mm, the sheet thickness can be selected as either 0.13mm or 0.12mm;
If the pitch> 0.5mm, then the steel thickness can be between 0.15mm - 0.20mm;
If the BGA ball pitch > 1.0mm, then select a 0.15mm thickness.
If the 0.5mm≤BGA ball pitch ≤1.0mm, then select a 0.13mm thickness.

component thickness
3) It is a priority to select the thickness by BGA or the smallest component if two or more different ICs are simultaneously placed on the board.
4) Step stencil may be applied if the thickness will be 0.1mm for matching a fine pitch component with an area ratio of 0.66, while requiring a 0.13-0.15mm thickness for other components. (Step-down) thickness should be 0.2mm for ceramic BGAs while requiring 0.15mm for other components (Step-up).
 
Bittele Offered Technical Expertise to Attendees at IPC APEX EXPO 2016
Bittele Electronics Exhibited at EPTECH 2016
Bittele Electronics Completes New PCB Assembly Line
Bittele strategy climbs turnkey PCB assembly ladder
Bittele Electronics Announces ISO 9001:2008 Certification
Bittele Electronics Sponsors Georgia Tech's Solar Car Engineering Team
Bittele Electronics Offers Free 'Design For Manufacturing' Service to its Customers
Bittele Electronics Introduces New Website for German Customers
Bittele Electronics Sees Double-Digit Growth
Bittele Electronics Adds Quick-Turn Capabilities
 
Sample Bill of Materials (BOM)
Sample Assembly drawings
How to create a Centroid File?
How to Export Gerber Files from Eagle?
Bittele's ISO 9001:2008 Certificate
PCB Fabrication Specifications
 
testimonials
 
payment types
 
 
 
About Us | Services | Quality | Archives | Privacy | Contact
Copyright 2003-2017, Bittele Electronics Inc. All Rights Reserved.