PCB Fabrication quote PCB Assembly quote Free passive parts
 

Panelizing Small Sized PCBs

The complete size of panel has to be kept small while break-routing and many PCBs shouldn’t be placed in one panel. Material wasted by cutting off increases significantly if too many small sized PCBs are in a single panel. This also reduces the strength of your PCB. If the panel size is increased in break-routing while putting in small PCB designs, it’ll bend from the center when kept horizontally.

If the design can’t be changed, additional material is to be added within PCBs for strength reliability. Now let’s suppose we have a cutting tool which is 2mm wide which obviously needs a bigger clearance than its width for stability. In similar fashion, tolerance of 5mm isn’t stable because 2mm * 2mm clearance cut away will just leave 1mm which makes it more unstable.

Two small sized break-routed PCBs should be cleared from each other by a minimum of 10mm.

For a stronger panel, choose a wider one.

Break-outs tabs should be placed horizontally and vertically when break-routing is utilized. These tabs are hard to be defined or not possible at all for small PCBs since a minimum 5mm of accessible length is required to avoid improper placement.

Using V-cut method for board separation is often the most optimized and mechanically stable answer for panelizing small sized PCBs.
 
Bittele Offered Technical Expertise to Attendees at IPC APEX EXPO 2016
Bittele Electronics Exhibited at EPTECH 2016
Bittele Electronics Completes New PCB Assembly Line
Bittele strategy climbs turnkey PCB assembly ladder
Bittele Electronics Announces ISO 9001:2008 Certification
Bittele Electronics Sponsors Georgia Tech's Solar Car Engineering Team
Bittele Electronics Offers Free 'Design For Manufacturing' Service to its Customers
Bittele Electronics Introduces New Website for German Customers
Bittele Electronics Sees Double-Digit Growth
Bittele Electronics Adds Quick-Turn Capabilities
 
Sample Bill of Materials (BOM)
Sample Assembly drawings
How to create a Centroid File?
How to Export Gerber Files from Eagle?
Bittele's ISO 9001:2008 Certificate
PCB Fabrication Specifications
 
testimonials
 
payment types
 
 
 
About Us | Services | Quality | Archives | Privacy | Contact
Copyright 2003-2017, Bittele Electronics Inc. All Rights Reserved.