PCB Fabrication quote PCB Assembly quote Free passive parts
 

Panelizing PCBs with Tab Routing

Tab routing is a popular PCB panelizing approach that uses tabs with or without perforations. If you are separating the panelized PCBs manually, you should use the perforated type. If you feel that breaking the PCB off the panel would cause too much stress on the PCB, it is wise to use a special tool that will prevent board damage.

One of the benefits of tab-routing is that you can produce non-rectangular boards. Conversely, a disadvantage of tab-routing is that it requires additional board material, which can increase your costs. It also can place more stress on the board near the tab. To prevent board stresses, avoid placing PCB parts very near the tabs. While there isn’t a specific standard for placing parts near the tabs, generally speaking, 100 mils is a typical distance. In addition, you may need to place parts more than 100 mils for bigger or thicker PCBs.

You can remove PCBs in panels before or after they are assembled. Since PCB panels make it easier to assemble, the most common approach is to remove the PCBs after the panel is assembled. However, you must use additional care when removing PCBs from panels after they are assembled.

If you don’t have the special PCB removal tool, you must take special care when removing the PCBS from the panel. Do not bend it!

If you were to break off the PCB from the panel without care, or even if the parts are extremely near the tabs, you may experience parts damage. In addition, solder joint sometimes rupture, which can cause problems later. It’s preferred to use a cutting tool to remove the PCBs to avoid bending the board.
 
Bittele Offered Technical Expertise to Attendees at IPC APEX EXPO 2016
Bittele Electronics Exhibited at EPTECH 2016
Bittele Electronics Completes New PCB Assembly Line
Bittele strategy climbs turnkey PCB assembly ladder
Bittele Electronics Announces ISO 9001:2008 Certification
Bittele Electronics Sponsors Georgia Tech's Solar Car Engineering Team
Bittele Electronics Offers Free 'Design For Manufacturing' Service to its Customers
Bittele Electronics Introduces New Website for German Customers
Bittele Electronics Sees Double-Digit Growth
Bittele Electronics Adds Quick-Turn Capabilities
 
Sample Bill of Materials (BOM)
Sample Assembly drawings
How to create a Centroid File?
How to Export Gerber Files from Eagle?
Bittele's ISO 9001:2008 Certificate
PCB Fabrication Specifications
 
testimonials
 
payment types
 
 
 
About Us | Services | Quality | Archives | Privacy | Contact
Copyright 2003-2017, Bittele Electronics Inc. All Rights Reserved.